JVP-6 Vacuum Pump
Standard Series Dry Vacuum Pump
The JVP-6 Vacuum pump is a oil-free dry running vane pump. It is a stock item from the JVP line of pumps. This pump
can produce up to 25 inches of Mercury, and up to 19.8 CFM (cubic feet per minute). The JVP-6 would typically use a 1.5
hp or 1.1kW three phase motor, but can also be coupled with a single phase motor. The modular configuration makes this pump
very easy to maintain, with one knob nut to replace or inspect filters. It is a direct coupled direct drive vacuum pump
which runs at 1700 rpm.
The standard porting on the JVP-6 is two (2) 3/4 “ NPT ports for the vacuum. One for the vacuum regulator, which is standard, and the second port is for you to hook up to your application. There would also be a 1/4“ NPT port with a vacuum gauge.
Option: Two 3/4“ NPT ports for the pressure, with a 1/4“ port for the pressure side.
Option: Complete vacuum setup for Vacuum, ported for vacuum, without motor.
Option: Vacuum pump only. Complete pump, less base, and manifold, motor and coupling.
These pumps are in production daily on printing presses, vacuum frames, robotic arms, etc. The JVP-6's rugged design makes it suitable for most industrial applications.
If this pump works for you, but you would also like to have a second one ported for pressure,
check out our JVP-6DP.
|Model||Hz||Max Vacuum||Max Pressure||Vacuum CFM||Blower CFM||Motor||RPM|
|Model||Suction/Exhaust Port Diameter||Motor||Weight|
|JVP-6||RC3/4 Female NPT||3-Phase 1.5kW 4P||44||97|
Standard Vacuum Manifold Setup
|Includes||JVP™ Brand Fitment||Orion™ Brand Fitment||Configuration Options|
||Other Manifold SetupsMore Info|