JVP-3 Vacuum Pump
Standard Series Dry Vacuum Pump
The JVP-3 vacuum pump is an oil-free dry running vane pump. It is a stock item from the JVP line of
pumps. This pump can produce up to 25 inches of Mercury, and up to 7.4 CFM (cubic feet per minute).
The JVP-3 would typically use a .5hp .37kW three phase motor, but can also be coupled with a single
phase motor. The modular configuration makes this pump very easy to maintain, with one knob nut to
replace or inspect the filters. This pump is a direct driven direct coupled pump, which runs at 1700RPM.
The standard porting on the JVP-3 is two 3/4 NPT ports for the vacuum. One for the vacuum regulator, which is standard, and the second port for hooking up to your application. There is also a 1/4 NPT port with a vacuum gauge.
Option: Two 3/4“ NPT ports for the pressure, with a 1/4“ port for the pressure side.
Option: Complete vacuum setup for Vacuum, ported for vacuum, without motor.
Option: Vacuum pump only. Complete pump, less base, and manifold, motor and coupling.
These pumps are in production daily on printing presses, vacuum frames, robotic arms, etc. The JVP-3's rugged design makes it suitable for most industrial applications.
If this pump works for you, but you would also like to have a second one ported for pressure,
check out our JVP-3DP.
|Model||Hz||Max Vacuum||Max Pressure||Vacuum CFM||Blower CFM||Motor||RPM|
|Model||Suction/Exhaust Port Diameter||Motor||Weight|
|JVP-3||RC3/4 Female NPT||3-Phase .37kW 4P||21.0 (24.0)||46.3 (52.9)|
Standard Vacuum Manifold Setup
|Includes||JVP™ Brand Fitment||Orion™ Brand Fitment||Configuration Options|
||Other Manifold SetupsMore Info|