JVP-3DP Vacuum Pump
Double Pump Series
The JVP-3DP double vacuum pump is an oil-free dry running vane pump. It is a stock item from the JVP line of
pumps. This pump can produce up to 25 inches of Mercury, and up to 7.4~14.8 CFM (cubic feet per minute).
The JVP-3DP would typically use a 1.0hp .75kW three phase motor, but can also be coupled with a single
phase motor. The modular configuration makes this pump very easy to maintain, with one knob nut to
replace or inspect the filters. This dual pump is driven by a single motor by two timing belts and runs at 1700RPM.
The standard porting on the JVP-3DP is two 3/4 NPT ports for the vacuum. One for the vacuum regulator, which is standard, and the second port for hooking up to your application. There is also a 1/4 NPT port with a vacuum gauge. And, two 3/4“ NPT ports for pressure, one for the pressure regulator, and the other for your blow application, with a 1/4“ NPT port for the pressure side pressure gauge.
Option: Two 3/4“ NPT ports for the pressure, with a 1/4“ port for the pressure side gauge.
Option: Two 3/4“ NPT ports for the vacuum, with a 1/4“ port for the vacuum side gauge.
These pumps are in production daily on printing presses, and other applications where seperate vacuum and pressure ports are needed to run critical equipment. The JVP-3DP's rugged design makes it suitable for most industrial applications.
Catalog photo of JVP-5DP
|Model||Max Vacuum||Max Pressure||Vacuum CFM||Blower CFM||MAX CFM||Motor||RPM|
|Suction/Exhaust Port Diameter||Motor||Weight|
|RC3/4 Female NPT||3-Phase 1.0kW 4P||45.3||100|
Standard Vacuum Manifold Setup
|Includes||JVP™ Brand Fitment||Orion™ Brand Fitment||Configuration Options|
Pressure OnlyMore Info
Vacuum and PressureMore Info