JVP's OVP Series of Oil Sealed vacuum pumps operate according to the rotary vane principle.
The rotor is eccentrically positioned in the cylinder and has take-out slots for vane sliding.
The centrifugal forces when rotating push the vanes towards wall of the cylinder through the slots of the rotor.
The gas will be sucked in through a built-in anti suck back valve that prevents the pump from rotating backward at standstill,
and goes into the cylinder. The gas will be compressed and pushed out through the exhaust opening located between the pumps
housing and oil pump. The oil will be fed into the pump module from the oil pump for sealing and lubrication by differential
pressure between pump module and oil pump. The discharged oil as a mist with gas will be collected through the oil separators
in the upper part of the oil pump. The collected oil will be drawn into the pump inlet side for recirculation by the pressure
difference between suction and pressure side through a float valve or through the return line. A gas ballast will be working by
sucking ambient air into the cylinder for prevention of accumulation of condensation from the processed gas.
- Compact design, reliability, and durability.
- Easy to maintain and operate, simple to install.
- Air cooled operation, no water required.
- Direct Drive Design, no belts required.
- Integral exhaust filter - discharged air is 99% oil free.
- Quiet operation.
Chemical processing, power generation, food processing & packaging, environmental applications, agriculture, water supply treatment, medical, mining, oil & gas, research & development, and printing & bindery. Anywhere large quantities of high levels of vacuum are required, JVP-OVP series pumps are a good choice.
Packaging equipment, reticulated medical vacuum plant, vacuum drying, vacuuming mixing and deaeration, soil remediation, vacuum filtration, particle conveying, printing & paper, condenser exhausting, materials handling, router table holding, tank and pond aeration, back-flushing, sewage evacuation, and sewage digester gas compression.
|Model||In/Out Port Diam||Motor||Weight|
|OVP20||1/2" Intake, 1-1/4" Exhaust||3 Phase 0.5Hp, 1450-1740 RPM||20||44|
|OVP30||3 Phase 0.55 - 0.75 Kw, 1450-1740 RP||22||48.5|
|OVP40||3 Phase 0.75 - 0.90 Kw, 1450-1740 RP||20||44|
Request More Information JVP OVP Mainpage